Fabricated idler brackets and flange bearing to form the idler bracket assembly. Clecoed F-01405 bulkhead to the seat rib assembly along with the bulkhead angle, match drilled per instructions, disassembled and deburred.
Fit the center bottom skin to the forward bottom skins, match drilled the corners of the gear leg openings, drilled nutplate holes #27, and enlarged future hole for brake fitting to 11/16".
Cut the gear leg openings in the bottom forward skins using dremel and then sanded/buffed edges smooth.
Fit the center bottom skin to the forward bottom skins, match drilled the corners of the gear leg openings, drilled nutplate holes #27, and enlarged future hole for brake fitting to 11/16".
Cut the gear leg openings in the bottom forward skins using dremel and then sanded/buffed edges smooth.
No comments:
Post a Comment